FAQ - AIP

Faq

Trouble Shooting

Installation

Operation

One test station works normal and the other one shows fault
- When it comes that one test station works ok and the other one not, please check the wire connection first, to see if there is any loose connection on the abnormal side.
  More
Unpacking and installation
- Check the packing condition carefully before unpacking, to make sure that there is no damage during the delivery.
  More
Database setting
- For the touch screen panel, database settings should follow below steps: System-SQL, fill the database account information, save and exit.
  More
Test data query and export
- For touch screen panel, the system setting like language, time, voice volume, please enter system setting, new settings will be active after restart the panel.
  More
Insulation resistance value varies frequently
- If the operator find that the IR value varies frequently, please check weather there is some copper chops inside the test clamps, or check the ambient humidity,
  More
Setting of language, alarm time and volume
- For touch screen panel, the tester setting like language, time, voice volume, please enter tester setting, new settings will be active after restart the panel.
  More
Tester remind “GND abnormal”
- When the window of Ground error or GND abnormal pops-up, please contact the maintenance man,
  More
Poka-yoka setting
- For the touch screen panel, enter Model setting, operator can choose “retry, skip or cancel” when testing is NG
  More
First time power on and LCD monitor not powered
- If the LCD screen doesn’t light up after power on, please check the control power air switch, switch on B0AA PCB and check the E-stop push button, make sure all the switches are close loop in the circuit.
  More
How to change fixture for armature tester?
- When it is required to test an armature with same commutator but different lamination diameter, you need change the armature support plate,
  More
IPC and test unit communication not connected
- When the testing can not be started, and the net status shows unconnected, operator should power off the whole tester by press the E-stop button,
  More
User permission setting
- For the touch screen panel, login in with the super administrator, enter system setting, user can manage the permission of each operation account.
  More

1 2